Honda Fuel Pump

Deciding to replace your Honda fuel pump is one of the most crucial decisions you will make because putting it off can get your vehicle stalled in the middle of the road due to fuel pump break down. A fuel pump is of the basic parts of the car and it serves as an intermediary between the fuel tank and the car's engine. An automated fuel pump shoves the car fuel using a pressurized system to direct it to the carburetor which in turn is fed into the engine.

Today, most of the Honda models are using electric fuel pumps that supply the needed fuel into an injection system. When a fuel pump malfunctions, it will fail to deliver the required amounts of fuel to the engine which will result to stalling. Replacing a Honda fuel pump is not at all a complicated task to perform and you can even do it yourself after you purchase the appropriate fuel pump for your Honda. Here's how. " The engine must be cooled first before you perform any troubleshooting or parts replacement. And before you actually proceed to replace your fuel pump, you need to first depressurize the fuel system. This is very important because even if the car's engine is not running, the fuel pump will still maintain the pressure within the pumping system and this must be removed first. You can depressurize the system by starting the engine and draw the fuel pump fuse or the pump relay which in turn will kill off the engine.

Disconnect the fuel pump when the pressure has been relieved. " Refer to your car manual to locate the Honda fuel pump because depending on the model, fuel pumps are sometimes located on the inside of the fuel tank or right above the front side of the tank. If it is underneath the car, you may need to use a jack to rise up your car off the ground. If you are not sure as to the exact location, you can trace the fuel line from the engine to the gas tank which will eventually lead you to the fuel pump. " Once you have the location, start removing the pump by first removing all wires and other connections. Make sure you have something on you which you can use to catch fuel spill which is sometimes located inside the fuel line or the pump itself. " After you have removed all the connections and the old fuel pump has been disassembled, mount the new Honda fuel pump and reverse this process to restore all the components that have been taken down. Do not forget to connect all wires and pressure lines to ensure the efficient performance of your new pump and also test it for leaks. Replacing a defective Honda fuel pump with a new aftermarket model is easy. You do not need to have a technical know to understand how this will work and this can save you a lot of time and money when you replace your fuel pump yourself.